Organoclay Organophilic Montmorillonite Clay for Paint

Basic Info

Model No.: GDGEL-282

Additional Info

Packaging: 25kg/bag

Productivity: 20000MT/YEAR

Brand: GDGEL

Transportation: Ocean,Land,Air

Place of Origin: China

Supply Ability: 10000MT/YEAR

Certificate: ISO9001

HS Code: 38249999

Port: Shanghai,Ningbo,Tianjin

Product Description

GDGEL-282 RHEOLOGICAL ADDITIVE

Organoclay Organophilic Montmorillonite Clay for Paint Description：

GDGEL-282 is an organo clay (modified bentonite), designed especially for use in solvent based system. It can be used widely in solvents from low polarity to medium-high polarity.

Organoclay Montmorillonite Clay for Paint Properties:

Composition                        Organic derivative of a montmorillonite clay

Appearance                         Fine powder, light yellow

Moisture content (105℃,2hr)           3.5% Max

Loss on ignition (1000℃)              35% Max

Bulk density                         0.35-0.45g/cm3

Fineness (<74μm, %)                95% Min

Montmorillonite Clay for Paint Application:

●   Marine paint, Industrial paint, heavy-duty, anticorrosion paint such as bituminous coatings, polyester paints, Alkyd paints.

●   Sealant         ● Inks        ● Grease     ● Oil Drilling Mud

Organoclay Montmorillonite Clay for Paint Using:

GDGEL-282 disperses under high shear and requires a polar activator for best efficiency. Heat is not required to obtain good dispersion. Addition levels are typically in 0.2%~2.0%. Polar activator (95% Ethanol or 95% Methanol) is needed. Normally addition level of polar activator is recommended to be 45%~60% of GDGEL-282 in weight. If in xylene system, addition level of polar activator is about 30%-40% of GDGEL-282 in weight.

Pre-gel is made as below procedure.

1. Charge solvent to mill

2. Slowly add GDGEL-282 (6-10% by weight of total pre-gel) to mill under agitation.

3. Mix at high speed for 5 minutes.

4. Add polar activator.

5. Mix at high speed for 5 minutes.